top of page

Northwest Local Environmental Protection Group

Onsite Wastewater Systems

What is a septic system? How do I know if my system has a problem? How often should I have my system service?

If you've ever had your septic system replaced, you've probably had these questions and many others during the replacement process.  Buyers looking for their first home outside of town often have similar questions, as do realtors and lenders involved in rural property transfers.

I hope to share some of the answers to these common questions and more here.

​

So, what is a septic system and how does it work?  Modern onsite wastewater systems are designed to accept the wastewater flows from a structure and treat it in order to safely contain solids for later disposal and lower nitrates and pathogens in the effluent for safe onsite disposal.  These systems are comprised of two sections in a typical installation, the first being a tank designed collect the sewage, allow solids to fall out of suspension, retain fats oils and greases, and provide time for nitrates and pathogens to be consumed by microorganisms.

The second part deals with the treated wastewater allowed to exit the tank, we call this wastewater effluent. A few methods are approved in Kansas to deal with effluent, the primary method used in the NWLEPG area being absorption fields (commonly referred to as "laterals"). 

Absorptive fields work by spreading the effluent through a level trench in the ground that has been prepared with buried "chambers" that create a void space for effluent to spread and percolate through the soil, allowing futher nitrate and pathogen reduction to take place. Other trench methods, such as perforated pipe runs over rock beds were once common but are rarely used in this area today.  Absorptive fields are an excellent method for dealing with effluent in much of northwest Kansas due to the rate our soils drain. 

Another method that can be used when soils are tighter is the installation of wastewater lagoons. Lagoons are popular in the eastern portion of Kansas and in areas with silty or clay soils but are less desirable in areas with well drained soils suitable for absorptive fields. Lagoons also come with maintenance such as keeping the berms trimmed, preventing trees from growing in the lagoon, and fencing to prevent children and pets from entry, and maintaining a suitable water level to prevent odor.

​

How do you know if there is a problem with my system? The common signs that a system should be examined by a professional are sewage backing up into your home, sewage or effluent on the surface of the ground, depressions or sinking soil appearing suddenly in the area your system occupies, and strong sewage odor near the system. In many cases systems can be repaired or serviced if problems are discovered early and not ignored.  If you suspect your system has a problem, give us a call and we can assist in identifying possible solutions and help you locate a licensed installer if necessary. 

​

Now that we know the parts of an onsite wastewater system and common signs of trouble in your system, let's examine the considerations for installing a new system. 

​

Location , location , location.  It's important in your wastewater system design! At the NWLEPG we assist homeowners and contractors in identifying suitable locations for system components through site evaluations where we consider soil conditions, grade, required setbacks, sizing, and other factors necessary for protecting our critical surface and groundwater resources. Your first step in installing your new wastewater system should be to our office to schedule an evaluation.

​

How do I maintain my system?    Proper maintenance is important for longevity of your system, so here are some common points to check.  Your eyes are your best tool to maintain your system.  Every few months walk around the area where your system is installed and check for sewage or effluent on the surface of the ground, unexplained wet soil in a small area or very green plants where your system lives are an indication of possible problems.  Covers to septic tanks should be secured and in place to prevent accidental entry by children and pets. 

Prevent oils, greases, raw foods (such as from use of in-sink garbage disposals) and large quantities household chemicals from entering your system. All of these are difficult, if not impossible, for your system to effectively manage and may cause problems.  Sanitary wipes advertised as "flushable" should never go into your system, these products do not break down quickly like toilet tissue and can cause clogged sewer lines and can make tank pumping difficult.

​

Should I put something in my tank to "help" it work?    No.   Modern onsite wastewater systems utilize natural biological processes and are "fed" by the biological activity present in the wastes we flush.  Introducing products advertised for septic systems are unnecessary and can upset the delicate microbiome your system relies on to safely treat your wastewater.  Many of these products introduce excess nitrogen that can contribute to dangerously elevated nitrate levels in nearby water wells. Often the use of these types of products can create odor issues that are hard to correct without fully pumping out the septic tank. 

​

How often should I have my tank pumped?  We recommend every 5 to 7 years for most installations, however more frequent pumping may be required for systems under heavy use.

​

​

bottom of page